Skip to main content

MUSE Pi

Overview​

MUSE Pi Development Board Specifications:

  • The MUSE Pi development board features the K1 chip with an integrated 8-core X60, designed according to the RISC-V 64GCVB and RVA22 standards.
  • Storage options include LPDDR4X 4266 SDRAM with 8GB/16GB capacities and eMMC with 32GB/64GB capacities.
  • Power Supply: Type-C interface supports USB 2.0 OTG data transfer and PD3.0 protocol input (12V).
  • Ethernet: Two RJ45 ports supporting 1000 Mbps Ethernet.
  • HDMI: HDMI 1.4 interface supporting up to 1920x1080 resolution at 60Hz.
  • Card Boot: Supports TF card for expandable storage, usable as system boot storage with high-speed data transfer mode.
  • Bluetooth: Supports Bluetooth 5.0 standard and low-energy mode (BLE).
  • Wi-Fi: Dual-band (2.4GHz and 5GHz) 802.11ax wireless network connectivity.
  • MIPI DSI: 4-lane MIPI DSI interface supporting up to 1920x1080 resolution at 60Hz.
  • MIPI CSI: Supports 2x4-lane MIPI CSI with combinations of 4-lane+4-lane or 4-lane+2-lane+2-lane.
  • PCIe: Two PCIe x2 slots providing 10Gbps communication rates for fast expansion.
  • Audio: Supports stereo speakers, headphone output, and dual MIC recording.
  • GPIO: Compatible with the Raspberry Pi standard 26-pin interface.
  • USB: One USB 3.0 DRD port and one USB 2.0 Host port.

Physical Diagram​

muse_pi

Firmware Flashing Mode​

Follow the steps below while referring to the physical diagram:

  • Connect one end of the USB cable to the Type-C port on the board and the other end to your PC. Press and hold the SW2 button, then press the SW4 RESET button to enter firmware flashing mode.

For instructions on using the flashing tool, refer to the Firmware Flashing Tool User Guide. Once the flashing process is complete, press SW4 to restart the system.